Parting Locks

1. Use sloping screw to adjust mould plate and parting locks, then turn 90 degrees

2. Easy to assemble and disassemble, and cost efficient

3. Can also be installed into small, medium size, and 2-sectional injecting metal
pipes, or can be installed on sliding bases

4. Mould weight < 100kg, using 4 pcs of 12 Ø
Mould weight < 500kg, using 4 pcs of 16 Ø
Mould weight <1,000kg, using 4 pcs of 20 Ø
Mould weight > 1,000kg using at least 6 pcs

5. Insert parting locks into die mould about 3cm, then using H7 reamer to process
mould hole within +0.1mm range

6. Do not add any oil on parting locks, doing so will reduce the friction.